SAFETY SUMMARY
The following general safety precautions must be observed during all phases of
operation, service, and repair of this product. Failure to comply with these
precautions or specific WARNINGS given elsewhere in this manual will violate safety
standards of design, manufacture, and intended use of the product.
Preen assumes no liability for the customer‘s failure to comply with these
requirements, causing malfunction or damage on the product, personal injury, death
or any loss of, or damage to, property.
1) BEFORE APPLYING POWER
Verify that the product is set to match with the power line input.
Before relocating the product or reconnecting any cable, ensure the power line
input is cut off and the product has been shut down for 20 minutes.
2) PROTECTIVE GROUNDING
Make sure to connect the product to the protective ground to prevent an electric
shock before turning on the power.
3) NECESSITY OF PROTECTIVE GROUNDING
Never cut off the internal or external protective grounding wire, or disconnect the
wiring of protective grounding terminal. Doing so will cause a potential shock hazard
that may bring injury to a person.
.
4) OPERATING ENVIRONMENT
Do not operate the product in an area with poor ventilation.
Do not operate the product in the presence of flammable gases or fumes.
Do not block the cooling fan opening.
Do not push objects of any kind through the opening, or spill liquid of any kind
in the product.
5) DO NOT REMOVE THE COVER OF THE PRODUCT
Hazardous voltages may be present when covers are removed.
Component
replacement and internal adjustment can be done only by qualified service personnel.
