BIOS utility - 61
BIOS
UTILITY
The BIOS utility is a hardware configuration program built
into your computer's BIOS.
Your computer is already properly configured and optimized,
and you do not normally need to run this utility. However, if
you encounter configuration problems, you may need to run
it.
To activate the BIOS utility, press
F2
while the computer
logo is being displayed.
Boot sequence
To set the boot sequence in the BIOS utility, activate the
BIOS utility, then
press
F1
to access the
Advanced Setting
to select
Boot
from the categories listed on the left of the
screen.
Setting passwords
To set a password on boot, activate the BIOS utility, then
press
F1
to access the
Advanced Settings
to select
Security
from the categories listed on the left of the screen.
Find
Set Supervisor Password
and enter a password to
enable this feature. Once you have entered a password for
this feature, you may then enable/disable
Password on
Boot
.
Remember to select
F10
to properly save and exit the BIOS
utility when you are done making changes.
