Predator 69672 Owner'S Manual Download Page 4

      Page 4

For Generator technical questions, please call 1-888-866-5797.

For Engine technical questions, please call 1-800-520-0882.

Item  69672  69674        

SAFETY

OPERA

TION

MAINTENANCE

SETUP

16. Connect the Generator only to a load or 

electrical system (120 volt or 240 volt) that is 

compatible with the electrical characteristics 

and rated capacities of the Generator.

17. Insulate all connections and disconnected wires.

18. Guard against electric shock.  Prevent body 

contact with grounded surfaces such as 

pipes, radiators, ranges, and refrigerators.

19. Only use a suitable means of transport and 

lifting devices with sufficient weight bearing 

capacity when transporting the generator.

20. Secure the Generator on transport vehicles to 

prevent the tool from rolling, slipping, and tilting.

21. Industrial applications must follow 

OSHA requirements.

22. Do not leave the Generator unattended when it is 

running.  Turn off the Generator (and remove safety 

keys, if available) before leaving the work area.

23. The Generator engine can produce high noise 

levels. Prolonged exposure to noise levels 

above 85 dBA is hazardous to hearing. Always 

wear ear protection when operating or working 

around the gas engine while it is operating.

24. Wear ANSI‑approved safety glasses, 

hearing protection, and NIOSH‑approved 

dust mask/respirator during use.

25. People with pacemakers should consult their 

physician(s) before use.  Electromagnetic fields 

in close proximity to a heart pacemaker could 

cause pacemaker interference or pacemaker 

failure.  Caution is necessary when near 

the engine’s magneto or recoil starter.

26. Use only accessories that are recommended 

by Harbor Freight Tools for your model.  

Accessories that may be suitable for one 

piece of equipment may become hazardous 

when used on another piece of equipment.

27. Do not operate in explosive atmospheres, 

such as in the presence of flammable 

liquids, gases, or dust.  Gasoline‑powered 

engines may ignite the dust or fumes.

28. Keep grounded conductive objects, such as 

tools, away from exposed, live electrical parts 

and connections to avoid sparking or arcing.  

These events could ignite fumes or vapors.

29. Stay alert, watch what you are doing and 

use common sense when operating this 

piece of equipment.  Do not use this piece of 

equipment while tired or under the influence 

of drugs, alcohol or medication.

30. Dress properly.  Do not wear loose clothing or 

jewelry.  Keep hair, clothing and gloves away 

from moving parts.  Loose clothes, jewelry or 

long hair can be caught in moving parts.

31. Parts, especially exhaust system components, 

get very hot during use.  Stay clear of hot parts.

32. Do not cover the generator or its 

engine during operation.

33. Keep the generator, its engine, and 

surrounding area clean at all times.

34. Use the generator, accessories, etc., in accordance 

with these instructions and in the manner intended for 

the particular type of equipment, taking into account 

the working conditions and the work to be performed.  

Use of the equipment for operations different from 

those intended could result in a hazardous situation.

35. Do not operate the generator with known 

leaks in the engine’s fuel system.

36. This product contains or, when used, produces a 

chemical known to the State of California to cause 

cancer and birth defects or other reproductive harm.  

(California Health & Safety Code § 25249.5, 

et seq.

)

37. When spills of fuel or oil occur, they must be 

cleaned up immediately.  Dispose of fluids and 

cleaning materials as per any local, state, or 

federal codes and regulations.  Store oil rags in 

a bottom‑ventilated, covered, metal container.

38. Keep hands and feet away from moving parts.  Do 

not reach over or across generator while operating.

39. Before use, check for misalignment or binding 

of moving parts, breakage of parts, and any 

other condition that may affect the generator’s 

operation.  

If damaged, have the generator 

serviced before using.

  Many accidents are 

caused by poorly maintained equipment.

40. Use the correct generator for the application.  Do not 

modify the generator or its engine, and do not use the 

generator for a purpose for which it is not intended.

Operating Precautions (cont.)

Summary of Contents for 69672

























Reviews: