Page 7
For technical questions, please call 1-888-866-5797.
ITEM 57509
SAFETY
Op
ERA
TION
M
AINTENANCE
SETU
p
Service precautions
1.
Before service, maintenance, or cleaning:
a.
Unplug all devices from the generator.
b.
Turn the Switch to its “OFF” position.
c.
Close the Fuel Valve.
d.
Allow the engine to completely cool.
e.
Then, remove the spark plug cap
from the spark plug.
2. Keep all safety guards in place and in
proper working order. Safety guards include
muffler, air cleaner, mechanical guards,
and heat shields, among other guards.
3.
Keep all electrical equipment clean and dry.
Replace any wiring where the insulation is
cracked, cut, abraded, or otherwise degraded.
Replace terminals that are worn, discolored, or
corroded. Keep terminals clean and tight.
4.
Do not alter or adjust any part of the
generator or its engine that is sealed by the
manufacturer or distributor. Only a qualified
service technician may adjust parts that may
increase or decrease governed engine speed.
5. Wear ANSI-approved safety goggles,
heavy-duty work gloves, and
dust mask/respirator during service.
6. Maintain labels and nameplates on the generator.
These carry important information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
7. Have the generator serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the generator
is maintained. Do not attempt any service or
maintenance procedures not explained in this
manual or any procedures that you are uncertain
about your ability to perform safely or correctly.
8. Store generator out of the reach of children.
9. Follow scheduled engine and
generator maintenance.
Refueling:
1. Do not refill the fuel tank while the
engine is running or hot.
2. Do not smoke, or allow sparks, flames,
or other sources of ignition around the
generator, especially when refuelling.
3.
Do not fill fuel tank to the top.
Leave a little room for the fuel to expand as needed.
4. Refuel in a well-ventilated area only.
5. Wipe up any spilled fuel and allow excess
to evaporate before starting engine.
To prevent FIRE, do not start the engine
while the smell of fuel hangs in the air.
SAVE THESE INSTRUCTIONS.