Predator 57509 Owner'S Manual & Safety Instructions Download Page 6

Page 6

For technical questions, please call 1-888-866-5797.

ITEM 57509 

        

SAFETY

Op
ERA
TION

M

AINTENANCE

SETU
p

38. When spills of fuel or oil occur, they must be 

cleaned up immediately.  Dispose of fluids and 

cleaning materials as per any local, state, or 

federal codes and regulations.  Store oil rags in 

a bottom-ventilated, covered, metal container.

39. Keep hands and feet away from moving parts.   

Do not reach over or across 

generator while operating.

40. Before use, check for misalignment or binding of 

moving parts, breakage of parts, and any other 

condition that may affect the generator’s operation.  

If damaged, have the generator serviced 

before using.

  Many accidents are caused 

by poorly maintained generators.

41. Use the correct generator for the application.  

Do not modify the generator and do not use the 

generator for a purpose for which it is not intended.

parallel Kit precautions

TO pREVENT SERIOUS INJURY, DEATH, AND GENERATOR AND/OR 

GENERATOR DAMAGE FROM ELECTRIC SHOCK AND FIRE:

1. 

Follow parallel Kit instructions provided with 

Kit for connection and use of a parallel Kit.

2.  Only connect two identical Inverter Generators 

together using a Parallel Kit.

3.  Connect Parallel Kit only to terminals marked 

“Parallel Outlets” on the front of the Generator.

4.  Do not remove or connect a Parallel Kit 

while the Generator is running.

5.  Do not use a Parallel Kit that is 

attached to only one Generator.

Summary of Contents for 57509





























Reviews: