background image

using a generator indoors can KiLL yOu 

in MinuteS.
Generator exhaust contains carbon 

monoxide.  this is a poison you cannot see 

or smell.

neVer use inside 

a home or garage, 

eVen iF doors and 

windows are open.

Only use OutSiDe 

and far away from 

windows, doors, 

and vents.

read this material before using this product.

Failure to do so can result in serious injury.

SaVe tHiS ManuaL.

Copyright

©

 2012 by Harbor Freight Tools

®

.  All rights reserved.  

No portion of this manual or any artwork contained herein may be reproduced in 

any shape or form without the express written consent of Harbor Freight Tools.  

Diagrams within this manual may not be drawn proportionally.  Due to continuing 

improvements, actual product may differ slightly from the product described herein.  

Tools required for assembly and service may not be included.

Save This Manual

 

Keep this manual for the safety warnings and precautions, assembly, operating, 

inspection, maintenance and cleaning procedures.  Write the product’s serial number in the back of the manual 

near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and 

the receipt in a safe and dry place for future reference.

Owner’s Manual & Safety Instructions

When unpacking, make sure that the product is intact and 

undamaged.  If any generator parts are missing or broken, 

please call 1‑888‑866‑5797 as soon as possible.

Visit our website at: http://www.harborfreight.com

email our technical support at: 

[email protected]

email our engine support at: [email protected]

Owner’s Manual & Safety Instructions

Save This Manual

 

Keep this manual for the safety warnings and precautions, assembly, 

operating, inspection, maintenance and cleaning procedures.  Write the product’s serial number in the 

back of the manual near the assembly diagram (or month and year of purchase if product has no number). 

Keep this manual and the receipt in a safe and dry place for future reference.

 

When unpacking, make sure that the product is intact 

and undamaged.  If any parts are missing or broken, 

please call 1‑888‑866‑5797 as soon as possible.

Copyright

©

 2012 by Harbor Freight Tools

®

.  All rights reserved.  

No portion of this manual or any artwork contained herein may be reproduced in 

any shape or form without the express written consent of Harbor Freight Tools.  

Diagrams within this manual may not be drawn proportionally.  Due to continuing 

improvements, actual product may differ slightly from the product described herein.  

Tools required for assembly and service may not be included.

read this material before using this product.

Failure to do so can result in serious injury.

SaVe tHiS ManuaL.

reV 16g

Summary of Contents for 69674

























Reviews: