Precor TRM 425, Service Manual

Page: 40 / 146

INFORMATION DISPLAY DESCRIPTION
U-BOOT SW The console upper boot software version information.
U-BASE SW The console upper base software version information.
USAGE LOG Shows workout usage information for each individual
workout including the number of times and the total accu-
mulated time the workout was used.
Error Log List of the equipment stored error event codes (stores a
maximum of 30 error codes).
My Settings Menu (5671)
Service Access Code: 5671 (see "R20 How To Access Standard Service menus" on
page 28 )
The My Settings service menu is used to customize the equipment user interface loc-
alization and Workouts default settings.
To learn about the R20 console My Settings service menu, refer to the TRM425 Owners
Manua l:
l
Owners Manual .
MY SETTINGS DESCRIPTION
SAFETY CODE Enabled or disabled. When enabled, a user password (xxxx) is
required to use the machine.
Factory default: disabled
SET UNITS Sets units of measure to US Standard or Metric.
Default: U.S.
SET DEFAULT
WORKOUT TIME Controls whether workouts start with a default session time that is
different from the maximum session time.
Default: ON, 30 minutes
Range: 1 to 90 min
Use State: ON or OFF
If ON use must set a Default workout time in minutes.
Range: 1 to 240 min, NO LIMIT
Default: 60 min
SET MAX
WORKOUT TIME Sets the maximum workout sesstion time.
Range: 1 - 90 min
Default: 90 min
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions. Page 33
4 Standard Service Menus
My Settings Menu (5671)