©2019 Precor Inc. | Lateral Raise RSL 504 | Assembly Guide
12
4
Straighten the front two guide rods to a vertical position. Have your assistant lift
the guide rods up into the upper part of the frame.
5
Tools: Hex wrench, 6 mm
Torque wrench
While the assistant is holding the rods into the upper frame, reinsert the two
bolts underneath the guide rods removed in
Step 1
above. Let the guide rods
drop onto the bolts and fully tighten the bolts.
Tighten M10 screws to 32 ft-lb
(43 N-m) of torque.
6
1 M10 x 65 mm SHCS
2 washers, 11 mm
1 nylon lock nut, M10
Tools: Hex wrench, 8 mm
Socket wrench, 17 mm
1 guide rod with cap
Prepare the lower base for the add-on weight assembly. Place the retaining
screw through the bracket on the weight stack spacer.
Remove the cap from the guide rod and place the rod into bracket opening se-
cured by the screw.
7
2 bumpers
1 add-on weight
1 add-on weight handle
Place one bumper onto the third rod, followed by another bumper (wide sides
together), the add-on weight, and the add-on weight handle.
21
51
61
58
22
4
16
15
15
16
21
22
51
58
61
55
58
18