Precor P30 Console, Operating And Maintaining

Page: 138 / 156

64
Assembling and Maintaining TRM 800-Series Treadmills
During normal operation, the status light is a steady blue. It
changes color and pattern if the treadmill’s electronic drive
unit detects a mechanical or electrical problem.
Table 4. Active status light appearances and their meanings
Status light
appearance
Meaning Action required
Steady
(solid) blue
The treadmill is
operating normally and
does not currently
need maintenance.
None.
Pulsing blue The treadmill is due for
scheduled
maintenance (P80
console only), or the
treadmill belt needs to
be replaced (except for
230 V models).
Perform the needed
maintenance, then reset the
status light.
Steady
(solid)
yellow
The treadmill has
detected and
recovered from an
error. It can still be
used, but some
functions may not be
available.
Refer to the console’s event
log for more information.
Pulsing
yellow
The treadmill has
detected an error, has
been unable to recover
from the error, and has
taken itself out of
service.
Power-cycle the treadmill
(switch it off, wait 30
seconds, then switch it on
again). If the error occurs
again, check the console’s
event log for more
information, then contact
Precor Customer Support.