Discovery™ Series Olympic Shoulder Press (507) Assembly Guide
To assemble your equipment, follow the steps in the order listed in this assembly guide. For more product
information, visit us at
www.precor.com
.
WARNING
At least two people are required to assemble the equipment.
DO NOT attempt assembly by yourself.
Assembly requirements
When assembling the equipment, we recommend you:
Unpack the box and assemble the equipment close to where you plan to use it.
Locate the equipment at least 79 inches (2 meters) away from walls or furniture on either side
of the equipment, and 79 inches (2 meters) away from objects behind or in front of the equipment.
Assemble the unit on a solid, flat surface, so that it remains level and stable.
DO NOT move the equipment without assistance.
Specifications
Tools
Equipment Dimensions:
53” L x 64” W x 72” H
(1355 mm L x 1620 mm W x 1830 mm H)
Rubber mallet
Ratchet with an
8 mm hex socket
Equipment Weight:
300 lb (136.3 kg)
Hardware kit
Component
Quantity
Component
Quantity
Socket head cap bolt (M12 x 35 mm)
15
Flat washer (11 x 23 mm)
7
Flat washer (13 x 26 mm)
14
Plug
3
Shoulder head bolt (M10 x 30 mm) silver
2
Hex key (10 mm)
1
Shoulder head bolt (M10 x 30 mm) black
3
Hex key (6 mm)
1
Flat head cap bolt (M10 x 30 mm)
2
Hex key (8 mm)
1
Socket head cap bolt (M12 x 50 mm)
4
Storage horn bumper
4
Flat washer (13 x 20 mm)
5
Weight storage horn (short) 4
Nylock nut (M10)
2
Foot cover set
1
Self tapping screw
2
Begin assembly
Important
DO NOT fully tighten the fasteners until instructed to do so.
To begin assembly:
1.
Have your assistants hold the two uprights side by side (Figure 1).
2.
Place the lower cross tube between the uprights and secure it using four bolts and
four washers .
3.
Position the crossbar with its badge to right side (Figure 1) and secure it to the uprights
using four bolts and four washers .
Figure 1
