Cardio Theater Integrated Bracket Assembly Instructions
page 9
9.
Align the mounting holes.
Ask your assistant to slide the bracket
assembly to the inside of the upright supports
and align the mounting holes.
Important:
Continue feeding the remaining
cable so that no cable protrudes or gets
pinched while mounting the bracket.
10. Replace the fasteners.
Use a hex key to replace the four screws and
washers removed in step 6. For alignment
purposes, tighten the rear two screws first.
Wrench tighten the remaining two fasteners so
that the display console and bracket assembly
are securely attached to the upright supports on
the treadmill.
9
Install the Bracket Assembly
Display console
Bracket
assembly
Left upright
support
10
Left upright
support
Bracket
assembly
Display console
Tighten rear two
screws first.
