Precor CW-113, Assembly Manual

Page: 11 / 44

CW-113 Assembly and Maintenance Guide
page 11
Assemble the Pads
Assemble the Pads
1. Attach the Back Pad to the Back Support using
four 3-inch buttonhead screws (H)
four
5 ⁄
16
-inch split washer (J)
four
5 ⁄
16
-inch washers (K)
Wrench tighten.
2. Attach the Thigh Pad to the Back Support using
six 1¼-inch buttonhead screws (L)
six
5 ⁄
16
-inch split washers (J)
six
5 ⁄
16
-inch washers (K)
Wrench tighten.
This completes the assembly of the CW-113.
Clean the Pads and Assembly
To clean the pads moisten a clean, soft cloth in a
mild solution of soap and water and wipe the pads
thoroughly. Dry the pads with a clean, dry cloth.
Use the same procedure to clean the Main Frame and
plastic parts.
Frequently vacuum the floor underneath the CW-113 to
prevent the accumulation of dust and dirt. If necessary,
use the Back Support to lift the front end and tip the
CW-113 onto its wheels to roll it to a different location.
4 - 3” buttonhead screws
4 - split washers
4 - washers
6 - 1¼” buttonhead screws
6 - split washers
6 - washers