C546i Self Powered Elliptical Fitness Crosstrainer
Page 53
Procedure 7.14 - Replacing a Handlebar
1.
Remove the rear cover and disconnect the red battery lead from terminal M6 of the lower
PCA.
2.
Loosen the screws that fasten the upper end of the handrail into the upper handrail clamp.
3.
Loosen the four set screws that fasten the lower end of the handrail into the frame tube.
4.
Slide the upper end of the handrail out of the upper handrail clamp and then slide the lower
end of the handrail off of the frame tube.
5.
Slide the upper end of the replacement handrail into the upper handrail clamp and then
insert the lower end of the handrail onto the frame tube mount.
6.
Tighten the upper handrail screws and lower handrail set screws.
7.
Reconnect the red battery lead removed in step 1 and replace the rear cover.
