Precor 100i, Owner'S Manual

Page: 76 / 80

100i Commercial AMT Assembly Guide 6
Level the AMT.
Before allowing users on the AMT, make sure it does not wobble from
side to side.
To remove any side-to-side movement, take the following steps:
1. Ask your assistant to tip the unit forward to expose the three
levelers on the rear base.
2. Rotate the levelers to raise or lower the unit.
Important: If the unit is placed on a slightly uneven surface,
rotating the levelers can help, but will not compensate for extremely
uneven surfaces.
3. When you are finished adjusting the AMT, ask your assistant to
gently lower the unit to the floor.
Levelers
Install the rear pedestal over the rear crosspiece.
Important: The rear pedestal lays flat on the floor. It provides a
mounting platform for stepping onto the AMT and also indicates the
buffer zone that patrons must stay clear of when someone is using
the AMT.
Rear pedestal