Step 5:
Fix the Handlebar (5) to the handlebar Post (4) with
Hexagon Socket Cap
Head Bolt (23) and Spring Washer (22) and Flat washer(15),then put the
Handlebar Clamp Cover(24) on it.
Step 6:
Pull the Sensor Wire (27) through the Computer Bracket (25), insert the
Computer Bracket (25) on the top of the Handlebar Post (4). Then connect the
Wire (27) to the Computer (26), fix the Computer (26) onto the Computer
Bracket (25).
N.B.: If the micro-controller can not adjust the tension after time of use, please
put apart the buckle and adjust the tightness of the belt, then press the buckle
tightly again.
Summary of Contents for PRE100
Page 3: ...EXPLODED DIAGRAM...
