50
Faucet and Water Line Installation for PWS APK-1
1.
Now you are ready to attach the pantry faucet to the sink. The kitchen
sink is the most desirable location for the faucet as it is close to the
cooking area. To install the faucet you will need to drill a 7/8” hole in the
sink and counter where you want the faucet. Drill a 5/8” hole through the
sub floor of the cupboards and floor to accommodate the water tubing.
Pantry Faucet Assembly Diagram
2.
See
Pantry Faucet Assembly Diagram
above. Connect the two pieces
of the pantry faucet by first wetting the O rings on the outlet spout (A) with
water or dish soap. Be careful not to damage the O rings when inserting.
Slowly rock the spout as you push it into the tap section (B). Use a cloth
wrapped around the nut first to prevent damage to the nut when
tightening. Turn the nut on the spout with pliers so that it is snug. Do not
over tighten. The O rings will provide the seal for the water. The spout
can be swivelled for convenience after installation is complete.
3.
Install the faucet gasket on the faucet threads and insert the pantry faucet
threaded base thro
ugh the 7/8” hole in the sink. Secure the faucet to the
sink with the faucet nut. Tighten with a basin wrench or pliers.
4.
Attach ½” OD water tube to the pump outlet elbow with a ½”
Nut/Cone/Ring. Tighten with a 10” adjustable wrench or basin wrench.
PANTRY FAUCET ASSEMBLY DIAGRAM
CONNECTION NUT
BEFORE
AFTER
O-RING
TAP (B)
OUTLET SPOUT (A)
