14
RF Remote Call
-
Send Controls
The two key fobs (transmitters) and the seat control have been factory programmed.
If you are installing two lifts in the same home, it is not necessary to change the program. Each trans-
mitter and receiver is unique and has its own rolling code.
If a key fob needs to be programmed, remove the safety pan from the bottom of the footrest to access
the RF receiver.
Both buttons on each key fob or call
-
send must be programmed to the unique RF receiver.
Programming:
Press and hold the UP learn button on the receiver.
Press the
‘
A
’
button on the key fob; Release when the SIG LED flashes.
Release the UP learn button.
Press the
‘
A
’
button on the key fob to test. An LED next to the relay will illuminate if programmed cor-
rectly.
Repeat process to program the
‘
B
’
button with the DOWN learn button.
Repeat process for each transmitter.
Down Relay
Up Relay
Up Learn Button
Down Learn Button
DIP Switches set to OFF
WHT
–
DC
+
BLK
–
DC
-
RE
D
–
RE
LA
Y 2
BLU
–
RE
LA
Y 1
N.
O.
YEL
–
CO
M
. O
N EA
CH
SIG LED
