SW26PRE Assembly
Assembly Components
A. Hamper Rod (2)
B. Sweeper Leg (2)
C. Top Handle (1)
D. Hamper (1)
E. Sweeper Base (1)
A
B
C
D
E
Step 1
Attach the two Sweeper Legs to the
Sweeper Base using four (4)
1/4” x 1-1/2” Hex Head Bolts. Secure
these bolts with four 1/4” Lock Nuts.
STEP 3
Insert the Hamper Rods through the loop of fabric on
both ends of the Hamper. Insert the bottom Hamper Rod
into the slots on both sides of the Sweeper Base. Next,
stretch the Hamper and place the top Hamper Rod
in between the 1/4” L-Bolt and Top Handle Tube..
HOW TO USE YOUR SW26PRE SWEEPER
Brush Height Adjustment:
Simply pull in on the Adjustment Handle and move up or down to move brushes up and down
to desired height. The most effective way to sweep debris up is to have the brush tips barely
touching the tops of grass blades or pavement. If the unit seems to push “too hard”, move the
adjustment bar one notch higher.
Dumping Hamper:
The Hamper is easily dumped by removing the (top) Hamper Rod from both L-Bolts
on the Top Handle and removing the (bottom) Hamper Rod from both sides of the
Sweeper Base. Pull the Hamper assembly out from the unit and dump where desired.
Return the Hamper assembly to the sweeper unit to continue sweeping.
Adjustment Handle
DO NOT LUBRICATE THIS UNIT!
The sweeper bearings are pre-lubricated and sealed prior to
assembly. No other lubrication is needed for this unit.
DO NOT GREASE OR OIL THE GEARS IN THE WHEELS.
If you put grease or oil on these the brush WILL NOT WORK.
If you do add a lubrication, simply wipe the wheels and pinions
clean of all grease or oil.
Sweeping Direction
Right Side Pinion
Gear & Pawl
Left Side Pinion
Gear & Pawl
Tools Required For Assembly:
Two - 7/16” Wrenches
1/4” x 1-1/2” Hex
Head Bolts
1/4” Lock Nuts
1/4” x 1-1/2” Hex
Head Bolts
Sweeper Legs
Sweeper
Base
Step 2
Attach the Top Handle to both
ends of the Sweeper Legs using
1/4” L-Bolts and 1/4” Lock Nuts.
1/4” L-Bolt
Top Handle
1/4” Lock Nut
Hamper
Hamper Rod (top)
Hamper Rod (bottom)
Slot in Sweeper Base
1/4” L-Bolt
1/4” L-Bolt
1/4” Lock Nut
Sweeper Leg
Sweeper Leg
