9
Copyright © 2021 Quality Machine Tools, LLC
PM-1340GT v8 2021-04
Dimensions, approximate overall
Including stand: Width 69-1/4 in.
(65-1/2 in.)
, Height 48-1/2 in.
Depth 22 in. at chip tray, add 5 in. for cross slide
Weight
(lathe, excluding stand), net
1100 lb
(850 lb)
Welded steel stand, net
250 lb
Cast iron stand, net
500 lb
Power requirement
(two options)
1. 220 - 240Vac, 60 Hz, 1Ø, 12A full load
2. 220 - 240Vac, 60 Hz, 3Ø, 9A full load
Motor type
TEFC, 1.5 kW (2 HP), 1725 rpm
1.5 HP, 1Ø only, 10A full load
Work envelope
Gap insert length
7-1/2 in.
Distance between centers
40 in.
36 in.
Swing over gap
19-1/8 in.
18 in.
diameter
Swing over bed
13 in.
12 in.
diameter
Swing over cross slide
6-1/2 in.
6 in.
diameter
Cross-slide travel
6-3/4 in.
Compound (top slide) travel
3-1/2 in.
Center rest (steady rest) capacity
2-1/2 in. diameter
Follower rest capacity
1-1/2 in. diameter
Drive system
High/Low belt drive with 6-speed gearbox
Low range, rpm
90, 135, 205, 205, 308, 475
High range, rpm
335, 505, 770, 780, 1160, 1800
Carriage drive, thread cutting
Leadscrew 8 tpi
Inch threads
Choice of 40, from 4 to 112 TPI
Metric threads
Choice of 24, from 0.25 to 7.5 mm pitch
Carriage drive, turning operations
Choice of feed rates from 0.0027 to 0.08 in./spindle rev
Cross slide drive
Choice of feed rates from 0.0015 to 0.04 in./spindle rev
Spindle
Chuck/faceplate attachment
D1-4 Camlock
Internal taper
MT5
Spindle bore
1-9/16 in.
Spindle length, chuck removed
13-3/4” (add approx 3-1/2 in. for 3-jaw chuck)
Tailstock
Internal taper
MT3
Quill travel
4 in.
PM-1340GT
(PM-1236T)
SPECIFICATIONS
