Set Up Guide for Serial CAT1 and FSX Page 2
Preface
This setup guide will walk you through the necessary steps to setup your PFC Throttle Quadrant
Console with Microsoft Flight Simulator X (FSX). For connection diagram please refer to the last page
of this guide.
It assumes that you have already installed FSX at least has ran it once. If you have not installed
and run it, please do so now and refer to this guide once that task is completed. For reference on
software installation, please refer to manual you received with your software.
Set Up Phases:
A. Install the PFC Serial Driver for FSX
B. Configure PFC Serial Driver for hardware communication
C. Enable and calibrate main controls
D. Enable and calibrate trim controls.
E. Enable Quadrants
F. Configure Consoles tab
