Precision Flight Controls Cirrus II, Set Up And Operation Manual

Page: 9 / 16

6 SWITCHING TO VERNIER CONTROLS
1. INSTALL A TWIN NON-VERNIER QUADRANT. (SEE SECTION 5 FOR STEPS)
2. REMOVE THE FOUR (4) SCREWS AROUND THE PANEL.
3. CAREFULLY PULL THE ASSEMBLY OUT.
4. DISCONNECT THE RJ-45 CABLE.
5. CONNECT THE RJ-45 CABLE TO THE VERNIER UNIT.
6. CAREFULLY INSERT AND THEN ALIGN THE SCREW HOLES.
7. SECURE THE UNIT WITH THE SCREWS.
8. STORE THE NON VERNIER UNIT IN A SAFE PLACE.