PD6700 Field-Mount Loop-Powered Process Meter
Instruction Manual
19
Operation
Front Panel Buttons Operation
Button
Symbol
Description
Press to enter or exit
Programming Mode or exit
Max/Min readings
Press to reset Max/Min
readings
Press to display Max/Min
readings alternately
Press to display Max or Min
reading indefinitely while
displaying Max or Min
The meter displays
4.000
mA. Apply a 4.000 mA
signal and press
Enter
. The display flashes for a
moment while the meter is accepting the signal.
After the signal is accepted, the meter displays
20.000
mA. Apply a 20.000 mA signal and press
Enter
. The
display flashes for a moment while the meter is
accepting the signal.
Maximum & Minimum Readings
(
MAXIMUM
&
MINIMUM
)
The maximum and minimum (peak & valley) readings
reached by the process are stored in the meter since
the last reset or power-up. The meter shows
MAXIMUM
or
MINIMUM
to differentiate between run mode and
max/min display. Press
Enter
to remain in Max/Min
display mode. If
Enter
is not pressed, the Max/Min
display readings will time out after ten seconds. The
meter will return to display the actual reading.
Reset Meter to Factory Defaults
When the parameters have been changed in a way
that is difficult to determine what’s happening, it might
be better to start the setup process from the factory
defaults.
Instructions to load factory defaults:
Enter the
Advanced
features menu.
Press and hold
Reset
button when
INFO
is shown.
Press
Enter
when
RESET
DFALTS?
prompt is shown
Note: If
Enter
is not pressed within three seconds, the
prompt will stop flashing return to showing
INFO
.
Factory Defaults & User
Settings
The following table shows the factory setting for most
of the programmable parameters on the meter. Next
to the factory setting, the user may record the new
setting for the particular application.
Model: ____________________________________
S/N: ______________________________________
Date: _____________________________________
Parameter
Display
Default
Setting
User
Setting
Programming
prog
Scale
Input 1
INPt1
4.000 mA
Display 1
Dspl1
4.000
Input 2
INPt2
20.00 mA
Display 2
Dspl2
20.000
Decimal point
Dd.ddd
3 places
Tag
Tag
Off
Password
PASSWRD
00000
(unlocked)
Advanced Features
Indicate
INDICAT
Off
Function
FUNCTN
Linear
Cutoff
CUTOFF
0
(disabled)
Filter
FILTER
Low
MENU
RESET
DISPLAY
ENTER
