PD6801 Explosion-Proof Loop-Powered Feet & Inches Level Meter
Instruction Manual
14
Main Menu Display Functions &
Messages
The meter displays various functions and messages
during setup, programming, and operation. The
following table shows the main menu functions and
messages in the order they appear in the menu.
Display
Parameter
Action/Setting
SETUP
Setup
Enter
Setup
menu
SCALE
Scale
Enter the
Scale
menu
for feet and inches
INPUT 1
Input 1
Set input 1 value in mA
DSPLY 1
Display 1
Set display 1 feet and
inches
INPUT 2
Input 2
Set input 2 value in mA
DSPLY 2
Display 2
Set display 2 feet and
inches
SAVE ?
Save
Save entered scale
parameters
SPN ERR
Span Error
Scale point 1 and 2
span error
FRACTN
Fraction
Enter the
Program
menu
1/16th
1/16
th
Set display for 1/16
th
inch fractions
OFF
Off
Turn off inch fraction
display
1/8th
1/8
th
Set display for 1/8
th
inch
fractions
PERCENT
Percent
Scale the tank indicator
full and empty values
0 PCT
0 Percent
Set the tank empty
value
100 PCT
100 Percent
Set the tank full value
DISPLAY
Display
Enter
Lower Display
menu
TAG
Tag
Display a custom unit or
tag
VOLUME
Volume
Display volume
VOL+ TAG
Tag
Display volume and
custom tag
PCT HT
Percent Height
Display percent height
PCT+ TAG
Percent Height
+ Tag
Display percent height
and custom tag
Main Menu
The main menu consists of the most commonly used
functions:
Setup, Advanced,
and
Password.
Press
MENU
button to enter
Programming Mode
then
press the
Up
Arrow
button to scroll through the main
menu.
Hold
MENU
, at any time, to exit and return to
Run
Mode
. Changes made to settings prior to pressing
ENTER
are not saved.
Press the
MENU
button during
Programming Mode
to
return to the previous menu selections.
Changes to the settings are saved to memory only
after pressing
ENTER
.
The display moves to the next menu every time a
setting is accepted by pressing
ENTER
.