PD6801 Explosion-Proof Loop-Powered Feet & Inches Level Meter
Instruction Manual
13
Buttons and Display
Button
Symbol
Description
Symbol Status
Menu
FT
Feet
IN
Inches and
Fractional
Inches
Right
arrow/
Reset
20-Segment
Tank Level
Indicator
Bargraph
Up arrow/
Display
Password
Enabled
Enter/
Alarm
Acknowledge
Menu Button
•
Press the
Menu
button to enter Programming
Mode.
•
Press the
Menu
button during Programming
Mode to return to the previous menu
selections.
•
Hold the
Menu
button for 1.5 seconds at any
time to exit Programming Mode and return to
Run Mode
.
•
Press and hold the
Menu
button for 5 seconds
to access the
Advanced
Features
of the meter.
Right / Reset Button
•
Press the Right arrow button to reset the
maximum or minimum value while it is being
displayed (see
Up / Display Button
below).
•
Press the
Right
arrow button to move to the
next digit or decimal position during
programming.
•
Press
Right
to go backward through most
selection menus.
Up / Display Button
•
Press Display when in Run Mode to cycle
through displaying the maximum value,
minimum value, and the loop input value in
mA. The display will time out in 12 seconds.
Press Display again to resume normal lower
display operation (lower display will read
RESUME
).
•
Press the
Up
arrow button to scroll forward
through the menus, decimal point, or to
increment the value of a digit.
Enter
Button
•
Press the
Enter
button to access a menu or to
accept a setting.
•
Press
Enter
to acknowledge alarm (if enabled).
MENU
RESET
DISPLAY
ENTER