P
RO
V
U
™ PD6262 Dual Analog Input Rate/Totalizer
Instruction Manual
41
Advanced Features Menu & Display Messages
Display
Parameter
Action/Setting
factor
Factor
Multiplication constant
used in channel C math
calculations (F)
CutofF
Cutoff
Set low-flow cutoff
Ch-A
Channel A
Set low-flow cutoff for
Channel A
Ch-b
Channel B
Set low-flow cutoff for
Channel B
Count
Count
Set total count direction
Ch-A
Channel A
Set total count direction
for Channel A
Ch-b
Channel B
Set total count direction
for Channel B
Tot C
Total count
Set direction of total
count
Gtot C
Grand total
count
Set direction of grand
total count
up
Count up
Count up
Douwn
Count down
Count down
C strt
Count start
Enter count down start
value
AoutPr
Analog output
programming
Program analog output
parameters
Aout 1*
Analog output 1
Program analog output
1 (*1-3) parameters
Source
Source
Select source for the
4-20 mA output
break
Loop break
Set analog output if
loop break detected
Calib
Calibrate
Calibrate 4-20 mA
output (internal
reference source used
for scaling the output)
4 nmA
4 mA output
Enter mA output value
read by milliamp meter
with at least 0.001 mA
resolution
20 nmA
20 mA output
Enter mA output value
read by milliamp meter
with at least 0.001 mA
resolution
O-rang
Overrange
Program mA output for
display overrange
u-rang
Underrange
Program mA output for
display underrange
nmAx
Maximum
Program maximum mA
output allowed
nmin
Minimum
Program minimum mA
output allowed
User
User I/O
Assign function keys
and digital I/O
F1*
F1* function
key
Assign F1 function key
(*F1/F2/F3)
Advanced Features Menu & Display Messages
Display
Parameter
Action/Setting
F4
F4 digital input
Assign F4 function
(digital input)
dI I
Digital input 1
Assign digital input
1
– 8, if expansion
modules are connected
dO 1
Digital output 1
Assign digital output
1
– 8, if expansion
modules are connected
ICal
Internal
calibration
Enter internal
calibration (used for
recalibrating the meter
with a calibrated signal
source)
Ch-A
Channel A
Perform calibration on
channel A
Ch-b
Channel B
Perform calibration on
channel B
C CAL
Current
calibration
Calibrate 4-20 mA
current input (internal
reference source used
for scaling the input)
C lo
Current low
Calibrate low current
input (e.g. 4 mA)
C Hi
Current high
Calibrate high current
input (e.g. 20 mA)
V CAL
Voltage
calibration
Calibrate voltage input
V Lo
Voltage low
Calibrate low voltage
input (e.g. 0 V)
V Hi
Voltage high
Calibrate high voltage
input (e.g. 10 V)
Diag
Diagnostics
Display parameter
settings
LED t
LED test
Test all LEDs
Info
Information
Display software and
S/N information
erase
Erase
Erase MeterView Pro
software stored in
meter’s memory
