PD6830X Explosion-Proof Modbus Scanners
Instruction Manual
35
Advanced Menu
Display Functions & Messages
The scanner displays various functions and messag-
es during setup of advanced features. The following
table shows the
Advanced Features
menu functions
and messages in the order they appear in the menu.
Display
Parameter
Action/Setting
ADVANCE
Advanced
Enter
Advanced
menu
OUTPUT
Output
Setup open collector
outputs Out 1 and Out 2
OUT 1
Output 1
Assign function of open
collector output 1
OFF
Off
Disable output
PULSE
Pulse
Set Out 1 or Out 2 for
pulse output mode
RATE
Rate
Refer to pulse input
manual for any reference
to Rate, Total, or Grand
Total.
TOTAL
Total
GrTOTAL
Grand Total
RETRAN
Retransmit
QUAD
Quadrature
Assign pulse output to
quadrature
TEST
Test
Assign pulse output to test
mode
PV
Process
Variable
Assign pulse output to a
PV or CV
SORUCE
Source
Set pulse output reference
variable
ALARM
Alarm
Assign Out 1 or Out 2 for
alarm output mode
PV NUM
Process
Variable
Number
Assign alarm output to a
PV or CV
PV 1
Process
Variable 1
Select Process Variable to
assign alarm to (1-16)
SET
Set Point
Set alarm set point
RESET
Reset Point
Set alarm reset point
ON
On
Set output to on state
OFF
Off
Set output to off state
TIMER
Timer
Set Out 1 or Out 2 for
timed pulse output mode
Start
Start
Activate timed pulse
output
PERIOD
Delay
Set the time of one period
(seconds)
TIME
On
Set the active low pulse
width time
OUT 2
Output 2
Assign function of open
collector output 2
A OUT
Analog Output
Enter
Analog Output
menu
Display
Parameter
Action/Setting
SOURCE
Source
Set analog output
reference variable
PV1
Process
Variable 1
Set PV as analog output
source, can select any
active PV (1-16)
DSPLY 1
Display 1
Output display 1 value
OUt 1
Output 1
Output 1 value
DSPLY 2
Display 2
Output display 2 value
OUt 2
Output 2
Output 2 value
SAVE?
Save
Save entered analog
parameters
CV1
Math
Channel 1
Set CV as analog output
source, can select any
active CV (1-4)
DISABLE
Disable
Turn off the analog output
MATH
Math
Enter
Math
menu
CV 1
Math
Channel 1
Program math channel
(Channel 1-4)
MULTI
Multiply
Set math to multiply
PAR1
Parameter 1
Enter math function
parameter 1
PAR2
Parameter 2
Enter math function
parameter 2
PAR3
Parameter 3
Enter math function
parameter 3
L2P1
Level 2
Parameter 1
Enter nested math function
level 2 parameter 1
L2P2
Level 2
Parameter 2
Enter nested math function
level 2 parameter 2
L2P3
Level 2
Parameter 3
Enter nested math function
level 2 parameter 3
DIVIDE
Divide
Set math function to divide
DIFABS
Absolute
Difference
Set math function to
absolute difference
WAVG
Weighted
Average
Set math function to
weighted average
DRAW
Draw
Set math function to draw
RATIO
Ratio
Set math function to ratio
CONCEN
Concentration
Set math function to
concentration
CONST
Constant
Set math function to a
constant value
NONE
None
Set math function to none
ABS
Absolute Value
Set math function to
absolute value
SQRT
Square Root
Set math function to
square root
SUM
Sum
Set math function to sum
DIF
Difference
Set math function to
difference
