PD8-6060 Explosion-Proof Dual Analog Input Process Meter
Instruction Manual
41
Setting the Display Parameter &
Intensity (
dsplay
)
The main display (
Line 1
) can be programmed to
display:
1. Process value Ch-A
2. Process value Ch-B
3. Process value Ch-C
4. Toggle between Ch-A & Ch-B, Ch-A & Ch-C,
Ch-B & Ch-C, and Ch-A, Ch-B, & Ch-C
5. Relay set points
6. Max & min values for each channel
7. Toggle between Channel & units
8. Channel gross value (no tare) or toggle net
(tare) and gross values
9. Modbus
®
input
The secondary display (
Line 2
) can be programmed
to display:
1. Process value Ch-A
2. Process value Ch-B
3. Process value Ch-C
4. Toggle between Ch-A & Ch-B, Ch-A & Ch-C,
Ch-B & Ch-C, and Ch-A, Ch-B, & Ch-C
5. Relay set points
6. Max & min values for each channel
7. Toggle between Channel & units
8. Channel gross value (no tare) or toggle net
(tare) and gross values
9. Modbus
®
input
10. Off (no display)
11. Engineering units or custom legends
After setting up the input and display, press the Menu
button to exit programming and skip the rest of the
setup menu.
The displays can be set up to read channels A, B, or
C, toggle between A & B, B & C, A & C, A & B & C,
toggle between channels A, B, or C & units, the
max/min of any of the channels, including the math
channel (C), set points, gross (without tare) or net
(with tare) & gross values of channel A or B, or the
Modbus
®
input. In addition to the parameters
available on the main display, the second display can
display Engineering units or it could be turned off.
Display Intensity (
d-Inty
)
The meter has eight display intensity levels to give the
best performance under various lighting conditions.
Select intensity 8 for outdoor applications. The default
intensity is 6.
