PDW30 Point-to-Point Wireless Bridge Instruction Manual
21
Programming with PDW Manager
PDW Manager allows you to program the PDW30 wireless units from a PC with a USB connection. Units
connect to a PC via the micro USB connection on their face, underneath the enclosure cover. Use of
PDW Manager is required for programming advanced settings such as wireless encryption and analog
signal calibration.
PDW Manager can be found on the included CD or downloaded from
www.predig.com/PDWManager
.
Once the software is running, power the unit using a 12/24 VDC power supply and connect the device to
the PC using the provided USB cable.
The PC will automatically install the appropriate device drivers. Once this has completed, the device will
appear in the
Device
list at the top of the PDW Manager window. Click
Connect
.
The menu options displayed will vary depending on what type of unit is connected. The PDW30
primary
unit will have more options than the
secondary
unit. The image below shows the available options on the
configuration tab while the
primary
unit is connected.
