PD8-6262 Explosion-Proof Dual Analog Input Flow Rate/Totalizer
Instruction Manual
32
Display
Parameter
Action/Setting
Description
D gt-b
Display
grand total
B
Assign display to channel
B grand total
D rt-a
Display rate
and total A
Alternate display of
channel A rate and total
D rt-b
Display rate
and total B
Alternate display of
channel B rate and total
Drgt-a
Display rate
and grand
total A
Alternate display of
channel A rate and grand
total
Drgt-b
Display rate
and grand
total B
Alternate display of
channel B rate and grand
total
D set1
*
Display
Set 1*
Displays relay 1
(*through 4) set point.
D Hi-A
Display
high A
Display high value of
channel A
D Lo-A
Display
low A
Display low value of
channel A
D HL-A
Display
high/low A
Alternate between
high/low value of
channel A
D Hi-B
Display
high B
Display high value of
channel B
D Lo-B
Display
low B
Display low value of
channel B
D HL-B
Display
High/low B
Alternate between
high/low value of
channel B
D Hi-C
Display
high C
Display high value of
channel C
D Lo-C
Display
low C
Display low value of
channel C
D HL-C
Display
High/low C
Alternate between
high/low value of
channel C
D a-u
Display A
and
units/tags
Alternate display of
channel A and the unit/tag
D B-u
Display B
and
units/tags
Alternate display of
channel B and the unit/tag
D C-u
Display C
and
units/tags
Alternate display of
channel C and the unit/tag
D ta-u
Display total
A and total
units A
Alternate display of
channel A total and total
units
D tb-u
Display total
B and total
units B
Alternate display of
channel B total and total
units
D tab
Display total
A and B
Alternate display of
channel A total and
channel B total
Display
Parameter
Action/Setting
Description
D TAbC
Display total
A, B, and
math
channel C
Alternate display of
channel A total, channel B
total, and math result
channel C
nm bus
Display
Modbus
Display Modbus input
register
D off
Display off
Display blank line 2
D unit
Display unit
Display line 1 channel
units
d-Inty
Display
intensity
Set display intensity level
from 1 to 8
RELaY
Relay
Enter the
Relay
menu
Assign
Assignment
Assign relays to channels
or Modbus
Asign1
*
Assign 1
Relay 1 (*through 4)
assignment
Ch-A
*
Channel A*
Assign relay to channel A
(*or B or C)
Rate
*
Rate
Assign relay to rate
(*channel A and B only)
Total
*
Total
Assign relay to total
(*channel A and B only)
Gtotal
*
Grand total
Assign relay to grand total
(*channel A and B only)
nm bus
Modbus
Assign relay to
Modbus register
RLY 1
*
Relay 1
Relay 1 (*through 4) setup
Act 1
Action 1
Set relay 1 action
Auto
Automatic
Set relay for automatic
reset
Set 1
Set 1
Enter relay 1 set point
RST 1
Reset 1
Enter relay 1 reset point
A-nman
Auto-
manual
Set relay for auto or
manual reset any time
LatCH
Latching
Set relay for latching
operation
Lt-CLr
Latching-
cleared
Set relay for latching
operation with manual
reset only after alarm
condition has cleared
Altern
Alternate
Set relay for pump
alternation control
SAnmpl
Sample
Set relay for sample time
trigger control
Off
Off
Turn relay off
FaiLSF
Fail-safe
Enter
Fail-safe
menu
FLS 1
*
Fail-safe 1
Set relay 1 (*through 4)
fail-safe operation
on
On
Enable fail-safe operation
off
Off
Disable fail-safe operation
DeLAY
Delay
Enter relay
Time Delay
menu
