manualshive.com logo in svg

Precision Digital Corporation ConsoliDator Plus PD9000, Instruction Manual, Page: 32 / 36

Share
Download
Precision Digital Corporation ConsoliDator Plus PD9000 Instruction Manual Download Page 32

www.predig.com

   PD9000 

Multivariable Controller

32

PDA9000SH Sun Hood

MOD-LH Light / Horn

PDA9000SH Installed on PD9000 Conso  

mounted in PDA2909 enclosure

(Conso and enclosure sold separately)

Conso Shown in a PDA2919 Enclosure with  

MOD-LHRB1 Red Light / Horn and Button

(Conso and enclosure sold separately. Assembly required.)

Precision  Digital  conveniently  offers  the  MOD-LH  which 

contains pre-drilled holes on a Conso enclosure for 

installation of the PDA-LH and PDA-BUTTON accessories. 
The  Light  /  Horn  is  available  in  three  different  light 

configurations and is designed to be mounted in any of the 

PD9000-ENC Conso enclosures.
The first option is a factory ordered Light / Horn with a color of 

either red, green, yellow, blue, or white. The second option is 

a Light / Horn the user determines the light color (red, green, 

yellow, blue or white) by connecting the appropriate wire. The 

third option is a Light / Horn with red, yellow, and green layers 

the user can turn on independently. 
The  light  on  the  Light  /  Horn  can  be  wired  to  flash  (not 

available on PDA-LH5C) or stay steady on and the horn is 

rated at 85 dB.
The light and horn can be controlled independently of each 

other  via  separate  relays  on  the  Conso;  and  since 

the controller's relays can be reset in a variety of ways, there 

are several ways the Light / Horn can operate. For instance, 

the horn can be programmed to silence at any time via the 

soft keys on the front of the Conso, and reset the light 

automatically when the alarm clears.
When  MOD-LH  is  ordered,  the  accompanying  enclosure 

on the order comes with the holes pre-drilled for the Light / 

Horn and the Button, and the user performs the mounting and 

wiring. The Conso and enclosure are sold separately.
The PDA-LH Light / Horn and the PDA-BUTTON Button can 

also be ordered as separate items and the user performs all 

hole-drilling, mounting, and wiring as desired.

The PDA9000SH Conso Sun Hood provides shade 

for the Conso when it is mounted in direct sunlight. 

It is adhered to the Conso enclosure with industrial 

grade double-sided tape (provided).

Summary of Contents for ConsoliDator Plus PD9000





































Reviews:

No comments