manualshive.com logo in svg

Precision Digital Corporation ConsoliDator Plus PD9000, Instruction Manual, Page: 30 / 36

Share
Download
Precision Digital Corporation ConsoliDator Plus PD9000 Instruction Manual Download Page 30

www.predig.com

   PD9000 

Multivariable Controller

30

10.0 (254)

10.0

(254)

R=0.57 (14.5)

6.2

 

(157)

10.85

 

(276)

10.85

(276)

6.2

(157)

Panel

Panel Mounting

Bracket

•  Prepare panel cutout per the dimensions provided
•  Locate the panel mounting bracket and screws
•   Inspect the controller to assure the gasket is securely in place
•   Insert controller in the panel cutout, the latches on the top and bottom should hold it in place
•   Insert the panel mounting bracket from the back of the panel, observe the orientation of the piece marked TOP
•  Install the 12 screws provided

Panel Cutout Dimensions

Front Panel Dimensions

Panel Mount Installation

Panel Mounting

Notes:
1.  Panel cutout: 10.0" x 10.0" ±0.05" 

 

(254 mm x 254 mm ±1.3 mm),

 

see Front Panel Dimensions above.

2.  Panel thickness: 0.07" – 0.35" 

 

(1.8 mm – 8.9 mm) 

3. Clearance: Allow 6" (152 mm) behind panel

Units: 

Inches (mm)

Summary of Contents for ConsoliDator Plus PD9000





































Reviews:

No comments