AeroSwitch User’s Guide
8
Customizing the Appearance of Your AeroSwitch
Customize the appearance of your AeroSwitch with a picture or with one of the colored cap covers provided with
the switch.
Customize Your AeroSwitch with a Picture
1.
Remove the retaining ring by rotating it counterclockwise. Lift off the clear cap.
2.
Place a small picture on the black cap and place the clear cap over it or place a colored cap cover on the black
cap.
3.
Screw the retaining ring on to hold the cap in place.
Replacing the Battery
AeroSwitch is powered by a lithium coin cell battery. How long the battery lasts will vary by user and depend on
how much the AeroSwitch is used. Replacement batteries are available in stores. Look for a CR2032 lithium coin
cell battery. Rechargeable options are available.
1.
Turn the AeroSwitch off.
2.
Remove the battery cover screws and cover. Use the screwdriver provided with the switch.
3.
Remove the battery.
4.
Insert the replacement battery with the
+
(positive) facing up toward you.
5.
Turn the AeroSwitch on. If the blue LED flashes briefly, you have inserted the battery correctly.
6.
Replace the cover and screws.
Battery-Saving Tips
•
Pay attention to how the blue LED flashes when you turn the switch on. See “Turning the AeroSwitch On”
above.
•
If the AeroSwitch is going to be placed in a case or carry bag for transporting, turn it off to prevent the
switch from being activated accidentally.
•
Turn the AeroSwitch off if it is going to be stored or not used for an extended period of time.
