SCAN_
X_Y
Start/Stop Scan where:
X is 1 or 2 (the physical channel being started
or stopped) Y is 1 (Start Scanning) or 0 (Stop
Scanning)
The addressed channel cannot be currently
active, and must have been previously set up
for scanning.
Sample alerts:
-
DISABLE CHANNEL BEFORE MAKING
CHANGE
- SCAN NOT SET UP FOR THIS CHANNEL
BAND_
X
Assign band to current CH where:
X is 1 through 4, one of the internal calibrated
bands. The band’s parameters are loaded into
the setup previously selected by the CH
command. The current channel cannot be
currently active. Loads default parameters each
time a band is changed.
Sample alerts:
-
NOT A VALID BAND!
- DISABLE CHANNEL BEFORE MAKING
CHANGE
Example:
to select Band 2 for Setup 1A, type
this:
Ch_1A
Band_2
Then, change the default parameters as
required.