FSLIMRFRX
ENGLISH
ISFSLIMRFRX_09_05.doc
4
1. GENERAL
DESCRIPTION
FSLIMRFRF
is a radio receiver designed for wireless infrared barriers FSLIMRF.
It is equipped with an integrated 433MHz radio receiver, four output relays with 1A contract rating, an internal memory with a storage capacity of 999
wireless barriers and 4 LEDs for displaying alarm conditions.
It is also fitted with 4 keys and a 4-digit display for code and functional parameter setting, and more precisely for:
•
programming new barriers into the memory (through self-learning via radio)
•
deleting single barrier from the memory
•
temporarily disable a single barrier
•
selecting either bistable or timed operation mode for the alarm relay;
•
setting activation time for each relay (in the timed operation mode);
•
activating/deactivating the receiver
•
activating/deactivating barrier supervision
•
reading the historic of the last 10 registered events (alarm, battery, tamper and missing supervision)
All
FSLIMRFRF
circuits and components are housed in a plastic enclosure suitable for indoor installation and for mounting on bars according to DIN
standards.
2. TECHNICAL
FEATURES
Power supply
12-24Vac/dc
Inputs
integrated 433.92MHz radio receiver
Memory capacity
999 barriers
No. of output relays
4, associated to the events “alarm”, “battery”, “tamper” and “missing supervision”
Relay operating mode
timed from 1 to 180 seconds. The “alarm” relay can operate in toggle mode, controlled by the barriers with commands
of “alarm” and “end of alarm”
Relay contact rating
1 A
Programming
4 keys (FUN, INC, DEC, VAL), 4 displays and 4 LEDs
3. FUNCTIONS
F1 :
Enable
receiver
F2 : Enable control of supervision
F3 : Relay 1 activation time
F4 : Relay 2 activation time
F5 : Relay 3 activation time
F6 : Relay 4 activation time
F7 :
Erase
all
F8 :
Display
historic
F9 :
Erase
historic
F10 : Password
Programming new barriers
1. Simultaneously press keys INC and DEC.
2. Select a free storage location via keys INC and DEC (free location is indicated by decimal points being off).
3. Perform transmission with the barrier to be stored: decimal points go on
4. Confirm by pressing key VAL: decimal points briefly flash
5. Repeat procedure from step 2 to enter other barriers or simultaneously press keys INC and DEC to exit from programming mode.
Deleting barriers
1. Simultaneously press keys INC and DEC.
2. Select the storage location to be deleted via keys INC and DEC (decimal points on indicate that the location is engaged)
3. Press the VAL key. The word “Can” appears on the left-hand side of the display.
4. Press the VAL key again to confirm deletion. The decimal points go off and the storage location is deleted.
5. Repeat procedure from step 2 to delete other codes and simultaneously press keys INC and DEC to exit from the programming mode.
Activating/deactivating a single barrier
With this function it is possible to temporarily exclude alarms coming from a single barrier, without deleting the barrier from the memory of the
receiver.
1. Simultaneously press keys INC and DEC.
2. Select the storage location to be activated/deactivated via keys INC and DEC (decimal points on indicate that the location is engaged)
3. Press the VAL key. The word “Can” appears on the display.
4. Select via keys INC and DEC the value “On” (barrier activated) or “Off” (barrier deactivated)
5. Press the VAL key again to confirm selection.
6. Repeat procedure from step 2 to modify the status of other barriers or simultaneously press keys INC and DEC to exit from the programming
mode.
A locations in which a deactivated barrier is stored is displayed with only 2 decimal points on.
Activating/deactivating the receiver
With this function it is possible to select the status of the receiver. In OFF status the receiver is still working, but all alarms coming from the barriers
will be ignored.
1.
Simultaneously press keys INC and DEC.
2.
Press key FUN to access the function selection menu.
3.
Select function F1 by pressing keys INC and DEC.
4.
Confirm selection by pressing the VAL key; current parameter value appears on the display.
5.
Select via keys INC and DEC the value “On” (receiver activated) or “Off” (receiver deactivated)
6.
Confirm by pressing key VAL; display returns to function selection and the new parameter is stored.
7.
Simultaneously press keys INC and DEC to exit from programming mode.
