ENGLISH
EASY-PAD
ISEASY-PADA5EU_12_14
8
Activation code addition procedure:
1. Access the programming mode; the green indicator will be on.
2. Enter a 3-digit number from 000 to 999, and the green indicator will light up.
3. Enter the activation code. The code length should be the same as the admin code.
For example, the admin code is 12 (two is the length). Therefore a 2-digit code will need to be set; you
can define 00 to 99 codes.
If the admin code is 123 (three is the length), a 3-digit code will need to be set, you can define 000 to 999
codes.
And so on.
A beep sound will indicate that the code has been added successfully.
Press “#” to exit the setting menu.
Add a User Code (ZONE 2)
Access the programming mode, then:
Press “*” and “4”: the green indicator will flash; enter a 2-digit number from 00 to 09 and the green
indicator willflash.
1.
If the indicator lights up red: data have already been saved in this unit; press “*” twice to clear it.
2.
If the indicator lights up green: this code may be added to the defined codes.
Activation code addition procedure:
Enter the relevant code. The code length should be the same as the admin code.
For example, the admin code is 12 (two is the length). Therefore a 2-digit code will need to be set; you
can define 00 to 99 codes. If the admin code is 123 (three is the length), a 3-digit code will need to be set;
you can define 000 to 999 codes.
And so on.
A beep sound will indicate that the code has been added successfully.
Press “#” to exit the setting menu.
WARNING:The user code must be different from the administration code.
The code for ZONE 1 must be different from ZONE 2.
Set the Relay Activation Time for ZONE 1
Access the programming mode, then:
Press “*” and “1”: the indicator will flash green; enter a number from 00 to 99, the indicator will turn green
and a long beep will be heard, indicating that the unlocking time has been set susccessfully. 00-99 is the
delay time in seconds. i.e.: 05 means the unlocking time is 5s. If the unlocking time is 00: enter the input
code once to open the door, then type the input code again to close the door.
Press “#” to exit the setting menu.
Set the Relay Activation Time for ZONE 2
Access the programming mode, then:
Press “*” and “5”: the indicator will flash green; enter a number from 00 to 99, the indicator will turn green
and a long beep will be heard, indicating that the unlocking time has been set successfully. 00-99 is the
delay time in seconds. i.e.: 05 means the unlocking time is 5s. If the unlocking time is 00: enter the input
code once to open the door, then type the input code again close to the door.
Press “#” to exit the setting menu.
