1.2
DESCRIPTION
DOM-L1SIM is a miniaturised electronic control unit for managing a device via radio and wire, with a push-button or switch.
Flexible applications thanks to the fact that the load can be controlled in monostable, bistable or timer (from 1 second to 60
hours) mode.
The presence simulation function consists in a random activation of the lights that can be activated with a wired button or a
dedicated radio command, ideal for discouraging intruders while away from home.
The ISM (industrial, scientific and medical) radio frequency band guarantees a long range, even through walls and ceilings. Simple
programming with dip-switch, reduced dimensions with breakable tabs for fixing with screws or
for insertion into interconnection boxes with 55 mm diameter.
- Installation must be carried out only by qualified technicians in compliance with the electrical and safety standards in force.
- All connections must be made with the power turned off.
- Use suitable cables (0,75 m² recommanded).
- Do not cut through the aerial (see figure 1.1b)
- A suitably sized disconnection device must be set up on the electric power line that supplies the product.
- Disposal of waste materials must fully respect local standards.
1 PRODUCT FEATURES
WARNINGS
43mm
21mm
52mm
Led
Dip switches
Button
58mm
1.1
TECHNICAL DATA
Mains 120-240 VAC
1 contact: 230 V max 1000 W,
110 V max 500 W
100
433.920MHz ISM
IP20
-20 +55 °C
52x43x21 mm
Power supply
Outputs
Number of programmable transmitters
Radio frequency
Protection rating
Operating temperature
Dimensions
Fig.1.1a
Fig.1.2a
Fig.1.1b
Fig.1.2b
Fig.1.2c
Fig.1.2d
Fig.1.2e
Fig.1.2f
before after
L
N
L
N
N
Fig.1.1c
