23
Terminal (~230V AC (A)): power connection ~230V.
BUS (N):
Can be used as a ground loop if needed.
The terminal «heating sensor» is connected to the terminal,
which is in the STRAIN GAGE number 1,2.
The terminal of heating sensor 1,2,3:
Connects to the terminal that is on the heating sensor
numbered 5,6,7.
KDT - channel temperature sensor on the wire is installed
in the ventilation duct.
THESE TERMINALS ARE LOCATED ON THE CONTROL UNIT
PRANA 340S DP
The ventilation system is connected to the control unit.
Terminal (HEATR) MINI HEATING:
Connects to the same «HEATR» terminal on the PRANA
340S ventilation system. (If the system is equipped with the
miniheat function).
(SUPPLY) and (EXTRACT) terminals:
Connects to the same contacts on the PRANA 340S
Ventilation System.
EXTRACT L(BLACK), EXTRACT N(BLUE),
SUPPLY L(BLACK), SUPPLY N(BLUE).
Summary of Contents for 340S
Page 28: ...MODEL RANGE PRANA 2022 ...
