Pramac ES5500X 5.5 KW, Supplemental Instructions, Page: 10 / 17

9
7. Install in its place the new brass tee with valve and hose barbs. Note the position
shown in Figure 3.
Figure 3
8. Reinstall fuel injector pump, ensuring the fuel control pin (Figure 4) lines up in the
middle of the guide on the engine (Figure 5).
Figure 4 Figure 5
9. Install the three nuts holding the fuel injector pump.
10. Reconnect the metal fuel supply line in its original position.
11. Connect the new vent line to the hose barb on the new valve (Figure 6); install
clamp.
Figure 6