Rev C (8-18-2020)
ITK1xG
PRINTER QUICK SET-UP GUIDE
If your printer is equipped with a presenter, please follow the following instructions after setting your
printer to either Black Mark or Continuous
Select “Stored Printer Settings” tab in driver
Select “Read” button to load current printer settings
Under “Mark Type”, set to either Black Mark, Hole/Silicon, or
Continuous as per previous instructions
From the drop down menu under “Presenter”, select one of the
following settings:
DISABLED - Document prints and is immediately ejected
PASS DOCUMENT THROUGH PRESENTER AND EJECT -
Document is printed and then immediately ejected
PASS DOCUMENT THROUGH PRESENTER AND HOLD -
document is printed and presented, then held: if not
taken, disposition is then dictated by selection of
options in PRESENTER tab
LOOP DOCUMENT, PRESENT AND HOLD - document is
looped over top of printer, then fed through presenter
and held: if not taken, disposition is then dictated by
selection of options in PRESENTER tab. (DO NOT select
this option if using thicker fan fold ticket stock)
Select “Update” button, wait until loading is complete
Select “Presenter” tab in driver
Select a specific time-out option from the first drop down menu
(Ticket Not Taken Timeout), where DISABLED indicates no action
until next document is printed, otherwise a prescribed time is
passed until action taken.
Then select action to be performed either after the timeout option
is met, or when a new document is sent down to the printer
DISPOSE - document is retracted back into the presenter and
then disposed underneath printer. Please insure that the
bottom path of the presenter unit is not blocked to prevent
jamming of document when retracted. (DO NOT select dispose
if using thicker fan fold paper stock)
EJECT - document is ejected from presenter unit
Select “Purge Print Job” button to eliminate rest of document if first
page not taken
Press “Apply” button
FOR USING A PRINTER WITH A PRESENTER