SAFE USAGE OF THE LIGHTING FIXTURE
When unpacking and before disposing of the carton, check there is no transportation damage before using the lighting fixture.
there be any damage caused by transportation, consult your dealer and do not use the apparatus.
The lighting fixture can be only used indoors, IP20.
The lighting fixture is not designed or intended to be mounted directly on to inflammable surfaces.
The lighting fixture is only intended for installation, operation and maintenance by qualified personnel.
Do not project the beam onto inflammable surfaces, minimum distance is
Avoid direct exposure to the light from the lamp. The light is harmful to eyes.
Do not attempt to dismantle and/or modify the lighting fixture in any way.
Electrical connection must only be carried out by qualified personnel.
Before installation, ensure that the voltage and frequency of power supply match the power requirements of the lighting fixture.
It is essential that each lighting fixture is correctly earthed and that electrical installation conforms to all relevant sta
Do not connect this device to any other types of dimmer apparatus.
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the
Only handle the power-cord by the plug. Never pull out the plug
When the lighting fixture is hanged to a high place, please use a safety cord provided to pass through the lighting fixture’s
secondary safety fixing for safety seasons. For details, refer to “INSTALL THE LIGHTING
Exterior surface temperatures of the lighting fixture after 5 minutes operation is 45
There is no user serviceable parts inside the lighting fixture, do not open the housing and never operate
covers removed.
If you have any questions, don’t hesitate to consult your dealer or manufacturer.
Always disconnect the fixture from power, before
3/12
SAFE USAGE OF THE LIGHTING FIXTURE
When unpacking and before disposing of the carton, check there is no transportation damage before using the lighting fixture.
be any damage caused by transportation, consult your dealer and do not use the apparatus.
The lighting fixture can be only used indoors, IP20.
The lighting fixture is not designed or intended to be mounted directly on to inflammable surfaces.
lighting fixture is only intended for installation, operation and maintenance by qualified personnel.
Do not project the beam onto inflammable surfaces, minimum distance is 2m.
2m
Avoid direct exposure to the light from the lamp. The light is harmful to eyes.
Do not attempt to dismantle and/or modify the lighting fixture in any way.
Electrical connection must only be carried out by qualified personnel.
ensure that the voltage and frequency of power supply match the power requirements of the lighting fixture.
It is essential that each lighting fixture is correctly earthed and that electrical installation conforms to all relevant sta
ct this device to any other types of dimmer apparatus.
cord is never crimped or damaged by sharp edges. Never let the power-cord come into contact with other cables.
cord by the plug. Never pull out the plug by tugging the power-cord.
When the lighting fixture is hanged to a high place, please use a safety cord provided to pass through the lighting fixture’s
secondary safety fixing for safety seasons. For details, refer to “INSTALL THE LIGHTING FIXTURE “section.
Exterior surface temperatures of the lighting fixture after 5 minutes operation is 45
℃
, when achieving steady state it is
There is no user serviceable parts inside the lighting fixture, do not open the housing and never operate the lighting fixture with the
If you have any questions, don’t hesitate to consult your dealer or manufacturer.
from power, before installation, cleaning and any maintenance work !
When unpacking and before disposing of the carton, check there is no transportation damage before using the lighting fixture. Should
ensure that the voltage and frequency of power supply match the power requirements of the lighting fixture.
It is essential that each lighting fixture is correctly earthed and that electrical installation conforms to all relevant standards.
cord come into contact with other cables.
When the lighting fixture is hanged to a high place, please use a safety cord provided to pass through the lighting fixture’s handles as a
FIXTURE “section.
, when achieving steady state it is 65
℃
.
the lighting fixture with the
any maintenance work !
