5/12
Theatre Master manual.doc
Without connecting the controller, regulating the DIP
switch as shown below, the apparatus will run in stand-
alone mode.
In stand-alone mode, the projector will run automatically
the built-in programmes.
XLR CONNECTORS
Connection between controller and projector and between one projector and another must be made
with 2 core screened cable, with each core having at least a 0.5mm diameter. Connection to and from
the projector is via cannon 3-pin XLR plugs and sockets which are included with the projector. The
XLR's are connected as shown in the table above.
Note, care should be taken to ensure that none of the connections touch the body of the plug or each
other. The body of the plug is not connected in any way. The Theatre Master accepts digital control
signals in standard DMX512 (1990) format.
5-PIN AND 3-PIN CONVERSION
Theatre Master uses 3-pin XLR plug / socket. If your controller uses 5-pin XLR plug / socket, you
should convert 5-pin plug / socket into 3-pin socket / plug as shown below.
XLR CONNECTORS AND TERMINATOR
STAND-ALONE MODE
