5/22
3.
APPEARANCE
(The fixture has 2 versions with one having wireless control and the other not. Both versions must’t be exchanged after
ex-factory)
4. INSTALLATION
●RIGGING
Take 2 clamp and 2 safety cord out from the package and tighten the clamp with the arm, and then mount the whole unit on the truss,
tighten the clamp’s retainers to keep the unit stable. (See the WARNING on the underside of the base as shown above) To pass the
SAFETY CORD through the ARM for safety! Always ensure that the unit is firmly anchored to avoid vibration and slipping whilst
functioning. Always ensure that the structure that you are going to mount the unit to is secure and strong enough to support the weight
of the unit Loosen the big knob and adjust the head’s angle for the effect desired and the tighten it. The installation is completed.
(if the unit is wit wireless control, while being hung, the antenna should face down)
●PLACE A UNIT ON A FLAT SURFACE
Before placing a unit on a flat surface, loosen the small knob with the support and make the angle between the arm and the support
60degrees. Tighten the small knob. Loosen he big knob and adjust the angle between the arm and unit as desired and then tighten it.(if
the version is with wireless control, the antenna should face up if the fixture is placed on flat surface)
●
TRANSPORTATION
Before transportation, tighten both knobs after the arm and support are overlapped.
灯体
灯架
灯座
支架
保险绳
警告
为确保安全，
请将保险绳连
接在安全扣并
确认锁紧。
Body
suppor
base
safety cord t
suppor
Warning: For safety, please
ensure the safety cord runs
through the arm and is
tightened.
