PR Lighting PR-2130, Instruction Manual

Page: 4 / 20

4/20
INSTALL THE PROJECTOR
106
Safety Hook
Handle
Safety Cord
Digital
Control Panel
WARNING
Please run safety cord
through safety hook
!
Take 2 clamps and the safety cord out from the package and mount 2 clamps on the underside of fixture with 2 retainers attached to each
clamp. Hang the fixture on the structure and fasten the screws attached to each clamp. (See the
WARNING
on the underside of the base
as shown above)
To pass the SAFETY CORD through the HOLES for safety!
Always ensure that the projector is firmly anchored to
avoid vibration and slipping whilst functioning. Always ensure that the structure that you are going to mount the projector to is secure and
strong enough to support the weight of a XR 130 Beam
WARNING:
1. The projector MUST be lifted or carried by the HANDLES instead of clamps.
2. For safety the safety cord should afford 10 times the Projector’s weight.