INDEX
SAFE USAGE OF THE PROJECTOR
3
INSTALLING THE PROJECTOR
4
FITTING THE LAMP
4
POWER CONNECTIONS
5
CONTROL CONNECTIONS
5
DMX TERMINATOR
6
DMX CONTROL CHANNEL FUNCTIONS
6
TO SET THE DMX START ADDRESS
6
SETUP OPTIONS
7
SETUP OPTIONS TABLE
7
STAND-ALONE MODE
8
MAINTENANCE 8
KEEPING THE PROJECTOR CLEAN
8
TROUBLESHOOTINGS 8
TECHNICAL DATA
9
LIGHT OUTPUT
10
ELECTRICAL DIAGRAM
10
COMPONENT ORDER CODES
11
Please note that as part of our ongoing commitment to continuous product development, specifications are subject to change
without notice. Whilst every care is taken in the preparation of this manual we reserve the right to change specifications in the
course of product improvement. The publishers cannot be held responsible for the accuracy of the information herein, or any
consequence arising from them.
Every apparatus is tested completely and packed properly by the manufacturer. Please make sure the packing and / or the
apparatus is in good condition before your installation and use. Should there be any damage caused by transportation, consult
your dealer and do not use the apparatus. But any damage caused by improper use will not be assumed by the manufacturer
and / or dealer.
ACCESSORIES
THESE ITEMS ARE PACKED TOGETHER WITH THE PROJECTOR
Water proof 3-pin XLR plug (1 PCS)
Water proof 3-pin XLR socket (1 PCS)
Safety cord (1 PCS)
Barndoors (1 SET) (including 4 copper screws and 4 rubber washers, 4 screws and 4 flat washers)
This manual (1 PCS)
Optional: louvres (1 SET)
INTRODUCTION
Thank you for purchasing our product Design 150, PR-1150.
This product manual contains important information about the safe installation and use of this
projector. Please read and follow these instructions carefully and keep this manual in a safe place for
future reference.
The Design 150 is a projector of innovative, compact, silent colour changing, capable of extraordinary
perforamances in terms of colour mixing, reliability and versatility. The projector can be used in
numerous environments and for the most various applications. The product complies to CE norms and
standards and uses international protocol DMX 512. Design 150 can be used as a stand-alone unit or
linked to a controller. The Design 150 are particularly suitable for television studios and theatres, stage
lighting, limelights, backdrops, inside or outside shops and shopping centres, sport and other cultural
applications, and so on.
The Design 150 features 3 kinds of colour filters for CYM colour mixing and 2 blads for shutter/open. It
can be setup easily with the touch-switches and a digital display screen.
Design 150 manual.doc
2/12
