PR Lighting CSL 1037, Manual

Page: 4 / 14

4/14
INSTALL THE UNIT
Safety Cord
Clamp
Knob
Barn Door
The fixture works while being hung. Its head can be manually rotated with the range of 240 degrees. Before moving the head, loosen the
two angle-knobs. After the head is at the angle desired, tighten the two knobs.
Take 1 clamp and 1 safety cord out from the package and mount 1 clamp on the axis of the support with 1 retainer. Hang the fixture on
the structure and fasten the screws attached to the clamp. Always ensure that the fixture is firmly anchored to avoid vibration
and slipping whilst functioning. Always ensure that the structure to which you are attaching the unit to is secure and
strong enough to support the weight of the fixture. For safety the unit should have a secondary fixing with a safety
cord through the support of the unit to ensure safe mounting.
Warning:
1.
Clamp is only used for installation. The unit MUST be lifted or carried via supporting frame instead of clamps.
2. For safety the safety cord should afford 10 times of the unit’s weight