9
●
STAND-ALONE MODE
Operate the projector without connecting with a controller, enable the master mode through the operation panel, the
projector will run in Stand-Alone mode automatically.
DMX address can be set at any number within 512
.
●
MASTER/SLAVE MODE
Many projectors can run synchronously in the Master/Slave mode by linking them with each other. First,
connect the first fixture’s DMX output to the second fixture’s DMX input using XLR-XLR control cable and then connect the second
fixture’s DMX output to the third fixture’s DMX input, and so on until all projector are connected in this way. Eventually connect the
last fixture’s DMX output to a DMX terminator. Set 1
st
projector as the master and others are Slaves.
Start Addresses of all Slaves are 001; Operation mode of the Master can be set any mode for a Master’ and Slaves’ operation mode can
be set accordingly.
After Powered on, the group will run in Master/Slave Mode
7. OPERATION MENU
1
st
level menu
2
nd
level menu
3
rd
level menu
4
th
level menu
DMX Address
Standard mode:001 – 507
Extended: 001-502
HSI:001-508
HSIC:001-507
Config Setup
DMX Channel Mode
Standard 6
Default
：
Standard 6
Extended 11
HSI 5
HSIC 6
DMX Mode
XLR Only
Default
：
XLR First
Wireless Only
XLR First
Wireless First
Wireless To XLR
出
Unlink Wireless
Yes
LED OuptControl
No
Default:NO
Brightness
Timer control
MasterSlave
Slave
Default
：
Slave
Master
Color Offset
Red
128-255
Green
128-255
POWER IN
DMX IN
DMX OUT
DMX OUT
DMX IN
DMX OUT
DMX IN
Master
Slave
Slave
POWER IN
POWER IN
