PR Lighting AQUA LED 3000-W FRAMING, Manual

Page: 8 / 32

8
图案片安装 滤色片安装
1
1
2
2
Lock the tilt and loosen the 4 fast-fit screws on the upper cover ,After removing the cover, you will see the structures as the figure
above.
To replace a gobo on the rotating gobo wheel: take the rotator from the wheel in the sequence of
1→2
, take the gobo out from the
rotator by removing the tightening spring. Put the new gobo back to the rotator, then tighten it with the spring. Please ensure the
spring is in the narrow location of the rotator, which is the internal ring of it and flatten it. At last, pull up the spring strip using proper
tool and put the rotator back to the wheel with the assistance by another hand. Its installation is of the opposite sequence of
removal(
（
2→1
）
.
NOTE : Do not touch the glass gobo with bare hand. Place clean and soft paper or cloth between hand and glass gobos.
Tighten 4 hexagon screws after the cover is on. Unlock the tilt.
DANGER!
BEFORE REPLACEMENT OF GOBOS/COLOR FILTERS, A PROJECTOR MUST BE OFF THE
POWER!
Fix gobo wheel
Rotating gobo wheel
Color wheel
Gobo Installation