2 5202V108-UK
Warning
This device is designed for connection to hazardous electric voltages. Ignoring this warning can result in
severe personal injury or mechanical damage.
To avoid the risk of electric shock and fire, the safety instructions of this manual must be observed and
the guidelines followed.
The specifications must not be exceeded, and the device must only be applied as described in the
following.
Prior to the commissioning of the device, this manual must be examined carefully.
Only qualified personnel (technicians) should install this device.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
Warning
Until the device is fixed, do not connect hazardous voltages to the device. The following operations
should only be carried out on a disconnected device and under ESD-safe conditions:
Dismantlement of the device for setting of DIP-switches and jumpers.
General mounting, connection and disconnection of wires.
Troubleshooting the device.
Repair of the device replacement of circuit breakers must be done by PR electronics A/S only.
Warning
5202B4:
To keep the safety distances, one relay must not be connected to hazardous voltage at the same time as
the other relay on the same channel is connected to non-hazardous voltage.
Symbol identification
Triangle with an exclamation mark
: Warning / demand. Potentially lethal situations.
The CE mark
proves the compliance of the device with the essential requirements of the directives.
The
double insulation symbol
shows that the device is protected by double or reinforced insulation.
Ex devices
have been approved according to the ATEX directive for use in connection with installations
in explosive areas.
GENERAL
HAZARD-
OUS
VOLTAGE
INSTAL-
LATION
Summary of Contents for 5202
Page 15: ... µ µ µ µ 5202V108 UK 13 ...