Precautions For Use
This device is intended for indoor use only, in dry locations free of excessive moisture or
condensation. The unit is intended for permanent installations in areas where the ambient
temperature is an average of 70 degrees Fahrenheit (F), and remains within the range of 40
°
F to
90
°
F at all times the unit is operational. Safe operation of the unit depends upon installation and
operation according to the following guidelines.
Rated Operating Voltage
The BL-48 unit is rated for operation from DC voltage sources
from 22 volts minimum to 24 volts maximum. Application of
power supply voltages in excess of the maximum rating may result
in damage to the unit electronics, and possible hazards including
fire and the risk of electrical shock.
Class III Product
The BL-48 unit provides protection meeting the requirements for Class
III electrical products. The unit is intended for operation with external
power supplies which comply with the SELV (Safety Extra Low
Voltage) requirements. Operation of the unit from power sources
which do not meet the SELV standard is not recommended, and may
result in an increased risk of electrical shock .
Suitable Mounting Surfaces
The BL-48 unit may be mounted to any suitable surface, including
those consisting of normally flammable materials such as wood or
plastic. Mounting may be accomplished using the five ¼-20 female
threaded attachment points along the back of the unit, or by drilling
holes as necessary in the flanges on either side of the unit, and then
securing it to the support structure with appropriate fasteners. The unit
may be mounted in any orientation.
Product Compliance
The BL-48 unit has been tested for compliance with the General and
Particular Standards for Luminaires, under EN 60598-1 (2004), and EN
60598-2-1 (1989), and also for compliance with the Electromagnetic
Compatibility (EMC) standards under EN 610000-6-3 (2001) and EN
610000-6-1 (2001), and are certified to comply with these standards.
F
24 Volts DC
