PPI SOFTIE 180 Back, Owner'S Manual And Packing Instructions

Page: 46 / 47

44
Owners Manual - Revision 1.5
4.15 Installing the Softie Seat Pad
4.15.1. Turn the container over so that the pin protector flap is face down on the table.
4.15.2 Orient the pad so that the leg strap slot is facing the same direction as the front flap of the
container and the snaps are face down.
Note:
There are 4 snaps across the front edge of the container and pad. There are two snap across the
rear.
4.15.3 Place the pad on the back of the container and attach the snaps at the rear corners of the
container first.
4.15.4 Route the leg straps through the slot in the pad and attach the snaps at the front of the
slot.
4.15.5 Attach the snaps at the front corners of the pad.
4.16 Repair Log for:
Softie Serial Number _______________________________
Model ___________________________________________
Note:
Keep this manual as a permanent record of repairs. Or make a copy of this page and present it to
your rigger if repairs are needed. File returned report.
Note:
FAA regulations make distinctions between alterations and major and minor repairs. Consult
Para-Phernalia, Inc. or your rigger for information regarding the required rating and authorization
for alterations and repairs made to your Softie.
Date Place Signature Seal Repair performed